Bradford-white D-4-504S6FSX User Manual download pdf (Page 22)

Thermostat Adjustments

The thermostat dial is adjusted to its lowest setting when shipped from the

factory. When adjusting the thermostat, it should be remembered that lower

temperature settings are more energy efficient. To adjust the thermostat, turn

the dial clockwise until the minimum acceptable temperature is set. It is

suggested that the starting point setting not exceed the 120°F (49°C) or

“HOT” setting on the thermostat.

Figure 3. Gas Valve.

The thermostat dial is set to its lowest temperature setting when shipped from

the factory. Remember that lower temperature settings are more energy

efficient. Adjust the temperature by turning the thermostat dial. It is

suggested that the starting point setting not be greater than the “Hot” mark on

the thermostat dial (approximately 120°F [48.9°C]). Rotate the thermostat dial

counter-clockwise

to decrease the temperature setting. Rotate the

thermostat dial clockwise

to increase the temperature setting. Adjust

the dial until the minimum acceptable temperature is achieved.

LOW

SWITCH SHOWN

IN "ON" POSITION

HERMOSTA

DIAL

OFF

STATUS

Honeywell

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

No comments

Bradford-white D-4-504S6FSX User Manual Page 22